Jeep Drivetrain WK2
-
Vendor:Creative Steel
05-10 JEEP Grand Cherokee Front Differential Bushing Set
These polyurethane bushings replace the low quality, factory installed bushings in the front differential. If there is a “clunking” sound coming from the front of your vehicle during acceleration, the bushing above the pinion (pinion bushing) is the probable cause. The rubber material that...- From $249.95
- From $249.95
- Unit price
- per
-
Vendor:Sipple Speed & Performance
Max Effort MP3010 (WK2Jeep) Transfer Case
Sipple Speed and Performance Max Effort MP3010 Transfer Case for WK2 Jeep SRT8s. Description MAX EFFORT Transfer Case BuildAll tolerances and specs are set to MAX EFFORT standards. Disassemble unit Replace seals & bearings Upgrade clutch pack and chain Assemble transfer case Fill with...- From $2,695.00
- From $2,695.00
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS 2012-2018 Jeep Grand Cherokee SRT8 w/ NAG1 Trans Front Aluminum Driveshaft CHSH-WK2-3A
This single shaft is the same design we have used in most modern muscle cars for the last few years and is a proven and trouble-free front shaft for the 2012-18 Jeep Grand Cherokee SRT with the NAG1 or 8-speed transmission. This shaft will...- $1,382.62
- $1,382.62
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS 2018+ Jeep Grand Cherokee SRT / Trackhawk Direct Fit Dual CV 4in Aluminum Shaft CHSH-WK2-55-A
DSS 2018+ Jeep Grand Cherokee SRT / Trackhawk Direct Fit Dual CV 4in Aluminum Driveshaft- $1,301.46
- $1,301.46
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS 2018+ WK2 Jeep Grand Cherokee Trackhawk 2.75in Carbon Fiber 1-Piece FRONT Driveshaft CHSH-WK2-6C
DSS 2018+ WK2 Jeep Grand Cherokee Trackhawk 2.75in Carbon Fiber 1-Piece Front Driveshaft- $1,591.69
- $1,591.69
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS 2018+ WK2 Jeep Grand Cherokee Trackhawk 3.25in Carbon Fiber 1-Piece REAR Shaft CHSH-WK2-55-C
DSS 2018+ WK2 Jeep Grand Cherokee Trackhawk 3.25in Carbon Fiber 1-Piece Rear Driveshaft- $2,184.83
- $2,184.83
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS Dodge 2012-2013 Jeep Grand Cherokee SRT8 w/ NAG1 Trans 4in Alum 1-Piece Rear Shaft CHSH-WK2-1A
DSS Dodge 2012-2013 Jeep Grand Cherokee SRT8 w/ NAG1 Trans 4in Aluminum 1-Piece Rear DriveshaftThis Part Fits: Year Make Model Submodel 2012-2013 Jeep Grand Cherokee SRT8- $1,250.78
- $1,250.78
- Unit price
- per
-
Vendor:Driveshaft Shop
DSS 18+ Jeep Trackhawk WK2 3in Alum 1-Piece Front Shaft FLANGE MEASUREMENT REQ CHSH-WK2-6A
This single shaft is the same design we have used in most modern muscle cars for the last few years and is a proven and trouble-free front shaft for the 2018+ Jeep Grand Cherokee Trackhawk. This shaft will replace the stock front shaft and...- $1,541.45
- $1,541.45
- Unit price
- per
-
Vendor:Per4mance Development
DIRS-F for Jeep SRT/Trackhawk and Durango SRT/Hellcat (2015 & newer) Front Diff
FRONT DIFFERENTIAL BRACE - We are pleased to offer this extremely robust new product for SRT Jeep GC/TH and Dodge Durango owners! It has exceeded our expectations and passed preproduction testing with extremely positive results with no increase in NVH. The DIRS-F is a complete bolt-on brace...- $589.00
$649.00- $589.00
- Unit price
- per
-
Vendor:Per4mance Development
DIRS-J for Jeep SRT/Trackhawk and Durango SRT/Hellcat (2015 & newer)
Differential Integration and Reinforcement System - reinforce your differential case and improve your car's IRS operation and traction with the DIRS-J! 100% satisfaction guaranteed.- Part one attaches the differential using the lower two main case bolts and the two lower case bolts to reinforce the...- $459.00
$499.00- $459.00
- Unit price
- per
-
Vendor:GForce Performance
2018+ Trackhawk Grand Cherokee 6.2L (WK2) / Durango HC Renegade Axles
The all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. The Renegade axles are leap above entry level axles. Machined from proprietary aerospace billet...- $1,999.00
- $1,999.00
- Unit price
- per
-
Vendor:GForce Performance
2018+ Trackhawk Grand Cherokee 6.2L (WK2) / Durango HC Outlaw Axles
GForce Engineering OUTLAW Axles are a direct replacement for factory half-shafts and are designed for cars making big power and/or with serious demands on their driveline. The all new Outlaw axles have been elevated from their previous design with an upgraded premium CV. The...- $2,399.00
- $2,399.00
- Unit price
- per
-
Vendor:GForce Performance
2012+ SRT Grand Cherokee 6.4L (WK2) / Dodge Durango SRT Renegade Axles
The all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. The Renegade axles are leap above entry level axles. Machined from proprietary aerospace billet...- $1,999.00
- $1,999.00
- Unit price
- per
-
Vendor:GForce Performance
2012+ SRT Grand Cherokee 6.4L (WK2) / Dodge Durango SRT Outlaw Axles
GForce Engineering OUTLAW Axles are a direct replacement for factory half-shafts and are designed for cars making big power and/or with serious demands on their driveline. The all new Outlaw axles have been elevated from their previous design with an upgraded premium CV. The...- $2,399.00
- $2,399.00
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 30 Spline 1.31in Axle Shaft Dia 3.92 & Up Ratio Rear Dana 44
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $669.99
$728.25- $669.99
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 30 Spline 1.31in Axle Shaft Dia 3.73 & Down Ratio Rear Dana 44
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $649.99
$706.51- $649.99
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 27 Spline 1.16in Axle Shaft Dia 3.73 & Up Ratio Front Dana 30
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $599.99
$652.16- $599.99
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 27 Spline 1.16in Axle Shaft Dia 3.54 & Down Ratio Front Dana 30
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $899.99
$978.25- $899.99
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 27 Spline 1.18in Axle Shaft Dia 3.54 & Up Ratio Rear Dana 35
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $603.99
$656.51- $603.99
- Unit price
- per
-
Vendor:Eaton
Eaton Detroit Truetrac Differential 29 Spline 1.21in Axle Shaft Dia 2.73 & Up Ratio Rear 8.375in
The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting...- $869.99
$945.64- $869.99
- Unit price
- per
