SPC Performance
-
Vendor:SPC Performance
SPC Performance THRUST ALIGN PLATE 3in.
Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate betweenthe axle and leaf spring...- $140.87
- $140.87
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance THRUST ALIGN PLATE 2.5in.
Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate betweenthe axle and leaf spring...- $136.91
- $136.91
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 04-15 Nissan Armada/Titan Front Adjustable Control Arm
Restore lost caster and camber on your lifted Nissan Titan and Armada to get your drivability back with these adjustable front upper control arms. Or, use them in combination with Titan OE lowers on Xterras and Pathfinders for a wider stance. This pair of...- $695.95
$756.47- $695.95
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 04-13 Nissan Armada / 05-12 Pathfinder / 04-13 Titan UCA Mounting Bolt
The upper control arm mounting bolts on many Nissan Trucks and SUV's are frequently corroded and must be cut out when removing or replacing the control arm. This hardware replacement kit (2) allows easy re-installation of the upper control arm. The pairof bolts and...- $21.36
- $21.36
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 14x16mm Slot Punch Tool
Turn any 9/16" (14 mm) hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5"...- $271.69
- $271.69
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance Ball Joint Press w/Adapters
Remove and replace ball joints without "brute force" methods that can cause costly damage. Now you can take on 4WD ball joint service in addition to servicing most cars. A forcing screw-powered press, used with proper adapters, easliy removes and installs all press-fit ball...- $231.56
- $231.56
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance HONDA B/JOINT PRESS SET
This tool was specifically designed to remove the original equipment ball joints on smaller cars when installing SPC Performance's sliding ball joints. With this revolutionary design you can remove the ball joint from the front upper control arm without removing the arm from the...- $172.56
- $172.56
- Unit price
- per
-
Vendor:SPC Performance
SPC Master Ball Joint Separator Set
This master balljoint separator set from SPC is a must for any technician replacing balljoints, control arms, or tie rod ends on today's car and SUV's. With 4 different opening sizes ( 24mm, 27mm, 31mm, 36mm ) a threaded height adjustment and 2 different...- $335.31
- $335.31
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance DODGE 1500 ADJ BALLJOINT
Lifted or lowered, factory cams don't give enough adjustment range on the Dodge Ram 1500 series of trucks. Gain 2.25° of camber or caster with these offset ball joints. Simply replace the ball joint inthe stock upper control arm to get ±2.25° caster, camber,...- $188.27
- $188.27
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 05-10 Jeep Grand Cherokee Adjustable Ball Joint (1.25deg.)
Add camber adjustment to your lifted Jeep Grand Cherokee or Commander with the highest quality ball joint on the market! This joint is specifically designed to work with raised suspensions and features: Induction hardened and oversized 18mm stud for extreme strength and high durability...- $192.07
- $192.07
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 12-22 Jeep SRT8/Trackhawk Cam Bracket Kit
Install this cam and guide kit to quickly and accurately dial in camber on Jeep Grand Cherokee SRT8 and Trackhawk models. Even with the suspension loaded, this kit makes changes of up to +-1.5deg camber fast and easy. California Residents WARNINGThis Part Fits: Year...- $79.95
- $79.95
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance Dodge 1500 CAM BOLT KIT(2)
Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you the same adjustment range as the factory...- $71.73
- $71.73
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance JEEP/DODGE CAM KIT
Install this cam and guide kit to quickly and accurately dial in the alignment angles on 2011 and newer Grand Cherokee and Dodge Durangos. Even with the suspension loaded , this kit makes changes of up to ± 1.5° camber/caster fast and easy.This Part...- $25.11
- $25.11
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 05+ Chrysler 300/04-08 Pacifica/08+ Dodge Challenger/06+ Charger Rear Toe Bushing
Extend the range of rear toe adjustment by ±1.5° on the rear of the Chrysler LX platform by installing SPC's offset bushing. The OE rear toe cam on the Challenger, Charger, 300, Magnum, and Pacifica gives you a ±1.0° window of adjustment. This is...- $31.58
- $31.58
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 05-12 Chrysler 300/Charger/09-12 Challenger Rear Upper Control Arm Bushing Kit
This kit combines our previous four kits into one - allowing adjustment of rear camber on the Chrysler LX platform cars regardless of model year and the complication that Chrysler used 2 different bushing sizes over the years. These "set at install" bushings can...- $54.96
- $54.96
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 05+ Chrysler 300 / 07+ Dodge Charger / 05-08 Magnum Front Camber/Caster Arm
Adjust front caster and camber on many popular all wheel drive Dodge and Chrysler vehicles with these adjustable upper control arms. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning...- $289.95
$315.16- $289.95
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 09-12 Dodge Charger/Chrysler 300 Front Adjustable Upper Control Arm
This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning problems that...- $229.95
$249.95- $229.95
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 06-08 Dodge Charger/Chrysler 300 Front Adjustable Upper Control Arm
This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust, this is the perfect kit for standard alignment issues as well as special suspension tuning problems that...- $239.95
$260.82- $239.95
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 11-17 Dodge Challenger RWD Cam Bolt Kit
Add permanent adjustability to the front end of the rear wheel drive Dodge Charger, Challenger, and Chrysler 300 vehicles with this cam bolt kit. The kit includes one camber cam and one caster cam to add adjustment to one side of the vehicle and...- $59.56
- $59.56
- Unit price
- per
-
Vendor:SPC Performance
SPC Performance 05-09 Chrysler 300/08-13 Dodge Charger/Challenger LX Camber/Caster Cam
Adjust camber or caster ±.3° using the factory offset in the lower control arm bushings of the popular Chrysler LX platform. Simply, replace the OE lower control arm bolts with these slotted bolts to achieve the change the factory provides. Need more adjustment? Replace...- $37.55
- $37.55
- Unit price
- per
